Boh-sun

It reduces your available peers. You can’t connect to other people with closed ports, one side needs to be open.

It isn’t a huge deal with popular torrents, but it can cause problems with unpopular/old stuff.

You can get a USB IR receiver and use software like LIRC to map the inputs of basically any remote you have. Setting it up takes a little effort, but it works great when it’s done.

grml-zsh-config is its name, and it’s always one of the first things I install on a fresh system. I’ll never understand why it isn’t the default.

I would sell a few of them to shore up the budget, then use those funds to build a NAS box. You can buy everything other than drives for a few hundred, less if you have spare parts sitting around.

Exactly. Doesn’t matter if they’re wired or wifi, or where they are, as long as they’re on the same network you’re fine.

If you’re only trying to use Jellyfin at home, you don’t need any reverse proxy or domain. All you need is for both devices to be on the same network, and for the Raspberry Pi to have a fixed internal IP address (through your router settings).

On the Shield, you just give the Jellyfin app that IP address and port number (10.0.0.X:8096) to connect and you’re good to go.

For a NAS, you’re usually concerned with capacity first. And you can’t buy a 20TB m2.

Automating updates is generally frowned upon, that’s when things can break. But waiting to run updates until you feel like it (instead of daily) is totally fine. I’ve been using Arch and its forks for years, and have always updated once a week unless something was wrong.

It isn’t recommended, but dpkg will install it if you really want to. You just need to handle dependencies manually.

But it’s a pretty rare issue. If something isn’t available in the official repo, AUR probably has it.

If you’re comfortable, you’re fine. Anything more would just be to speed up the rebuild, so it’s less important if you don’t mind taking the time.

You got a remux, which is uncompressed. You can turn those off in Radarr to avoid those surprises.

If you want to fine-tune your file sizes (and quality) further, you can set up custom formats and quality profiles. The Trash Guides explain it well, the “HD Blu-ray + Web” profile on that page is a solid starting point. It’ll usually grab 6-12GB movies, but you can tweak it if you want them smaller.

They’re also surprisingly easy to upgrade for their size. Swapped RAM, CPU, and hard drive in about 15 minutes total on one of mine.

I’ve been happy with DuckDNS. Free, simple, and reliable.

If you’re just looking for a music solution, check out Navidrome. It’ll run on basically anything, and there are plenty of compatible apps for playback (Subsonic API).

Jellyfin can handle music alongside movies/shows, but the music side isn’t as feature-rich. Great for basic playback though, I run both.

If it was me, I’d just go without parity temporarily and grab another drive for that when I could. A new system should be safe enough for a while, just not forever.

You can interact with a single container if you need to, not just the whole compose group. docker compose restart jellyfin works for your example, and “restart” can be swapped for stop or start as needed.

Splitting compose files can be a good idea, but it isn’t always necessary.

It does, but it’s done me wrong a few times so I never recommend it. For all I know it’s fine these days, but old grudges are hard do shake.

You could do it on the NAS. Qbittorrent is probably the highest-recommended client right now, and it has a web UI that can be accessed from any other device on your network.

That said, I run one of the tiny Thinkcentres as a dedicated torrent and *arrs box. I think I paid $30 for that one, and it has more than enough power for the task.

Given the recent issues with ads, I wouldn’t recommend anything Android/GoogleTV based. A USFF PC will give you better performance for less money, especially if you buy used. You can find 1L X86 boxes for $30-60 on eBay that are perfect for the job.