dudeami0

I think the point would to be make them like cigarette warning labels. At the moment the text can be hidden on a bottle or can in tiny text. It needs to be a big ugly white box with a black border and large text that gets people’s attention.

From my understanding, you are pretty safe as long as you don’t provoke them (walking through the middle of them might be considered provoking) or near their calves. This article from the UK states “Where recorded, 91% of HSE reported fatalities on the public were caused by cows with calves”. Basically, mothers with a child are going to be very protective.

Cows are a domesticated creature, so they are generally docile, but I would exercise caution because if need be they will use their mass and strength against you. I’ve heard of stories of farmers running from cows and narrowly escaping under a fence. Most of these did involve a farmer trying to separate a calve from it’s mother. I’ve also heard stories of cows jumping fences.

And as far as memes go:

Is it price gouging if there is a heat advisory is my question, and how enforceable is that. For water it’s just cruel, especially in places with little access to drinkable tap water.

This is what happens when you try to extract more and more value off the top of labor, without any added value other than line must go up. When suppressing wages is the only way to improve corporate profits, profits are capped and stockholders hate this. This is in theory suppose to encourage innovation to increase efficency (without just resorting to skeleton crews or pressuring labor for more output). Monopolies stop innovating due to market control and look at other methods of increasing profits with leverage rather than market competitiveness.

Yea this is just syntax, every language does it a little different, most popular languages seem to derive off of C in some capacity. Some do it more different than others, and some are unholy conglomerations of unrelated languages that somehow works. Instead of saying why is this different, just ask how does this work. It’s made my life a lot simpler.

var test int is just int test in another language.

func (u User) hi () { ... } is just class User { void hi() { ... } } in another language (you can guess which language I’m referencing I bet).

map := map[string]int {} is just Map<String, Integer> map = new HashMap<>() in another (yes it’s java).

Also RTFM, this is all explained, just different!

Edit: I also know this is a very reductive view of things and there are larger differences, I was mostly approaching this from a newer developers understanding of things and just “getting it to work”.

Sadly it wasn’t a bid to open source the AI, rather than a bid for payment.

My question would be, why do you need a more powerful server? Are you monitoring your load and seeing it’s overloaded often? Are you just looking to be able to hook more drives to it? Do you need to re-encode video on the fly for other devices? Giving some more details would help someone to give a more insightful answer. I personally am using a Raspberry Pi 4, Chromebox w/ an i7, an old HP rack server, and an old desktop PC for my self hosting needs, as this is cheaper than buying all new hardware (though the electricity bill isn’t the greatest haha, but oh well). If you are just looking for more storage, using the USB 3.0 slots on the Raspberry Pi 4b you can add a couple extra SSDs using a NVMe to USB 3.0 enclosure. For most purposes the speeds will be fine for most applications.

As for SSD vs HDD, SSD hands down. The only reason you’d pick an HDD is if your trying to get more storage cheaper and don’t mind a higher rate of failure. If your data is at all valuable, and it almost always is, redundancy should be added as well.

And as for running Linux, if it can’t run Linux I wouldn’t want to own it.

Edit: Fixed typo

This might help, sorry if it doesn’t, but here is a link to CloudFlares 5xx error code page on error 521. If you’ve done everything in the resolution list your ISP might be actively blocking you from hosting websites, as it is generally against the ISPs ToS to do such on residential service lines. This is why I personally rent a VPS and have a wireguard VPN setup to host from the VPN, which is basically just a roll your own version of Tailscale using any VPS provider. This way you don’t need to expose anything via your ISPs router/WAN and they can’t see what you are sending or which ports you are sending on (other than the encrypted VPN traffic to your VPS of course).

I use my own router with DD-WRT in-between the ISPs router/modem and my LAN, and use a different subnet. I haven’t had any issues with this myself, and my router just sees the ISP router/modem as the WAN.

I’ve never ran this program, but skimmed the documentation. You should be able to use the SHIORI_DIR (or a custom database table following those instructions) along with the -p argument for launching the web interface. A simple bash script that should work:

export SHIORI_DIR=/path/to/shiori-data-dir
shiori serve -p 8081

To run multiple versions, I’d suggest setting up each instance as a service on your machine in case of reboots and/or crashes.

Now for serving them, you have two options. The first is just let the users connect to the port directly, but this is generally not done for outward facing services (not that you can’t). The second is to setup a reverse proxy and route the traffic through subdomains or subpaths. Nginx is my go-to solution for this. I’ve also heard good things about Caddy. You’ll most likely have to use subdomains for this, as lots of apps assume they are the root path without some tinkering.

Edit: Corrected incorrect cli arguments and a typo.

If you are expecting a more windows-like experience, I would suggest using Ubuntu or Kubuntu (or any other distro using Gnome/KDE), as these are much closer to a modern Windows GUI. With Ubuntu, I can use the default file manager (nautilus) and do Ctrl+F and filter files via *.ext, then select these files then cut and paste to a new folder (drag and drop does not seem to work from the search results). In Kubuntu, the search doesn’t recognize * as a wildcard in KDE’s file manager (dolphin) but does support drag/drop between windows.

Does the flash drive show when you run lsblk with the correct amount of space? dd will overwrite the partition table and works directly with the underlying physical blocks of the device. If the flash drive isn’t broken, you should be able to rebuild the partition table with parted (tutorial from linuxconfig.org on the matter)

Using Nvidia with closed source drivers by chance? I had a similar issue and had to disable the services related to nvidia suspend/hibernate/resume:

systemctl disable nvidia-suspend nvidia-hibernate nvidia-resume

This is all I can think of, some hardware specs might help others with assisting you.